| 10 & 12 Meter Bands|| Large Frequency Display with Dimmer|
| Improved Receiver Design|| New Backlite Display|
| Variable Output Power Control|| Active Frequency Scanner|
| 16 Programmable/Erasable Frequencies|| Programmable Repeater Split|
| Receiver Clarifier (ą0.5kHz)|| Dual Panel Meters|
| Noise Blanker/ANL Circuitry|| Frequency Selector Lockout|
| Continuous Duty Built-in AC Power Supply|| 2 Year Warranty|
Designed to enhance any serious operators shack, this rack-mounted unit offers exceptional sound quality and large, easy-to-use controls. The RCI-2995DX has features that include: AM-CW-FM-SSB modes of operation, variable power, noise blanker and built-in heavy duty AC power supply and provides 150 watts PEP output, and a rear panel frequency meter output for measuring transmit operating frequency.
Dual panel meters display received signal strength transmitter power output and antenna SWR. Clarifier audio tone controls for accurate receiver tuning improved reception under difficult conditions. Pushbutton selection of programming scanning functions, and programmable repeater split for FM operation enhances the renewed 10 meter repeater activity.
The RCI-2995DX offers microprocessor-based advanced features typically found in high-end units costing several times as much, including programmable repeater offset and capabilities for a CTCSS tone option great for increasing repeater activity on 10 meters and receiver scanning for quick search of active frequencies. The unit offers three methods of frequency selection, non-volatile memory to store and scan up to ten favorite frequencies, scanning of selected frequency segment or stored frequenciesand front panel frequency selector lockout .
In addition, the RCI-2995DX offers an impressive array of design and performance improvements:
An improved receiver: designed for increased sensitivity and image rejections.
A double FET balanced mixer: for improved receiver intermodulation rejection.
Surface mount components: for increased resistance to shock and vibration.
Variable Power Output from 150 watts to 2 watts - great for PSK-31 operation.
Tone WiringFor complete instructions on wiring a CTCSS tone board into the RCI-2995DX, please click here: CTCSS.
For a side-by-side features comparison chart of the RCI-2995DX versus the other Ranger amateur models, please see the Comparison Chart.
10 Mtr: 28.000 - 29.6999 MHz
12 Mtr: 24.8900 - 24.9900 MHz
1 MHz, 100 KHz, 10 KHz, 1 KHz, 100 Hz
USB, LSB, CW, AM, FM
Operating Temperature Range
- 20 ēC to + 50 ēC
Left: RX Signal Strength
Right: RF Output, Antenna SWR
110 VAC, 60 Hz
( 220 VAC, 50 Hz Optional )
AC Power Consumptions
400 W Dynamic PTT - 6 Pin
Size (W x D x H)
19" x 12" x 6-1/4"
32 lb 6 oz
RF Power Output
50 Watts RMS: CW / AM / FM
150 Watts (PEP): SSB
USB, LSB, CW, AM, FM
Better Than 60 dB
More Than 60 dB
Standard SO-239 Type
Unbalanced 50 W
AM / CW: 0.7 ĩV for 10 db SINAD
FM: 0.5 ĩV for 12 db SINAD
SSB: 0.2 ĩV for 10 db SINAD
AM / FM Selectivity
50 db at 10 KHz
5 db at 2 KHz, 60 db at 4 KHz
More than 50 db
More than 80 db at 455 KHz
Audio Output Power
2.5 Watts @ 10% THD
> 50 db
IF Single Gate Type
Built In Speaker
Disables Internal Speaker When Connected, 8 W