CB Radio >

TRE-292

The Texas Ranger TRE 292 is a compact CB radio, perfect for installation in your truck’s dashboard or overhead console.

It features a durable, clear-sounding SRA198 noise-canceling microphone.

CB Radio >

TRE-292

Product Details

The Texas Ranger TRE 292 is a compact CB radio, perfect for installation in your truck’s dashboard or overhead console. It features a durable, clear-sounding SRA198 noise-canceling microphone. The radio has a sleek, classic look with a black faceplate and white lights that illuminate the panel meter and channel display. 

You can adjust the brightness of the lights with a dim switch, setting it to high, medium, or low.The multifunction front panel meter allows you to monitor signal strength and RF output during transmission or switch to SWR to check your antenna system. The included S/RF and SWR switch makes toggling between these functions easy. The built-in SWR meter and high SWR alert notify you of any antenna issues. 

The front-mounted microphone enhances convenience, and the Roger beep and Talkback features add to the radio’s practicality.

 

Specification

General:

Channels: 40

Frequency Range: 26.965 ~ 27.405 MHz

Emission: AM

Frequency Control: Phase-Lock-Loop (PLL) Synthesizer

Frequency Stability: 0.001%

Temperature Range: -30°C to +50°C

Antenna Impedance: 50 Ohms

Antenna Connectors: Standard SO-239 type

Input Voltage: 13.8V DC

Size: 7 1/4” (W) x 9” (D) x 2 1/4” (H)

Weight: 3.4 lbs

Transmitter:

RF Power Output: AM: 4W

Spurious Emission: > -60 dB

Unwanted Sideband: -50 dB

Audio Distortion: < 5%

Frequency Response: 300 to 2500 Hz

Microphone: Dynamic

Receiver:

Sensitivity for 10 dB (S+N)/N: < 0.5 uV 

Squelch Sensitivity: < 0.5 uV

Selectivity: > -50 dB

Image Rejection: > 60 dB

Hum & Noise: > -40 dB

AGC Figure of Merit: 50 mV for 10 dB Change in Audio Output

Audio Power Output: 2.5W @ 10% Distortion

Audio Response: 300 to 2500 Hz

Specification

General:
ModelTRE-936FFB
Channels40
Frequency Range26.965 ~ 27.405 MHz
EmissionAM
Frequency ControlPhase-Lock-loop (PLL) Synthesizer
Frequency Stability0.00%
Temperature Range-30°C to +50°C
Antenna Impedance50 Ohms
Antenna ConnectorsStandard SO-239 type
Input Voltage13.8V DC
Size7- 3/8” (W) x 8- 3/4” (D) x 2- 1/4” (H)
Weight4.2 lbs.

TRANSMITTER:
RF Power Output4W
Spurious Emission-60 dB
Audio Distortion10%
Frequency Response300 to 2500 Hz
MicrophoneDynamic

RECEIVER:
Sensitivity for 10 dB (S+N)/N< 1.0 uV
Squelch Sensitivity< 0.5 uV
Image RejectionMore than 65 dB
AGC Figure of Merit100 mV for 10dB Change in Audio Output
Audio Power Output3W @ 10% Distortion
Audio Response300 to 2500 Hz

Supplied Accessories

  • SRA-198NC noise cancelling microphone
  • DC cord with fuse
  • Mounting bracket with hardware
  • Microphone hanger with hardware

Controls and Indicators

1. MICROPHONE JACK

2.SQUELCH CONTROL

3. ON/OFF VOLUME CONTROL

4. RF GAIN CONTROL

5. MIC GAIN CONTROL

6. TALKBACK CONTROL

7. TONE CONTROL

8. RF POWER

9. CHANNEL SELECTOR

10. FRONT PANEL METER

11. S-RF/SWR SWITCH

12. NB/ANL/OFF SWITCH

13. RB/OFF SWITCH

14. PA / CB SWITCH

15. DIM. H/M/L

16. CH19/NORMAL SWITCH

17. RX/TX LED

18. ANT LED

19. CHANNEL DISPLAY

1. ANTENNA

2. DC POWER

3. PA SP

4. F.C

5. EXT. SP

Controls and Indicators

1. MICROPHONE JACK2. MIC GAIN CONTROL
3. ON/OFF VOLUME CONTROL4. SQUELCH CONTROL
5. RF GAIN CONTROL6. SWR CAL CONTROL
7. S-RF/CAL/SWR SWITCH8. TALKBACK CONTROL
9. CHANNEL SELECTOR10. FRONT PANEL METER
11. TX/RX LED12. FREQUENCY COUNTER
13. DIM/BRT SWITCH14. COUNTER OFF
15. PA/CB SWITCH16. NB/ANL SWITCH
17. ROGER BEEP SWITCH18. CH19/NORMAL SWITCH
19. CHANNEL DISPLAY 

1. ANTENNA2. DC POWER
3. PA SP4. EXT. SP