CB Radio >

TRE-2619

In-Dash Compact Form Factor: Space-saving chassis dimensions 7-1/4 W x 9 D x 2-1/4 H inches engineered to fit standard truck overhead consoles, DIN slots, or tight dashboard cubbyholes without sacrificing cab ergonomics.

Acoustic Noise Isolation: Bundled with the commercial-grade SRA-198NC dynamic microphone. High-velocity dynamic cartridge utilizes a directional acoustic chamber to aggressively suppress low-frequency ambient engine clatter, road vibrations, and cabin wind static for maximum voice modulation efficiency.

Integrated SWR Diagnostics: Features a built-in SWR calibration bridge and a multi-functional analog meter supported by a dedicated High SWR LED alert light. Enables immediate visual antenna impedance diagnostics to actively protect internal RF components from power feedback damage.

3-Position Talkback Control: Equipped with a heavy-duty 3-way toggle switch featuring High, OFF, and Low settings. Allows operators to cross-check voice modulation quality and adjust or completely deactivate real-time audio feedback based on changing cabin noise levels.

Tactile Interface and Instrument Dimming: Heavy-duty mechanical knobs for Volume, Squelch, Mic Gain, and RF Gain provide positive feedback for safe driving. Features a variable dimmer potentiometer for precise control of analog meter and channel LED intensity.

CB Radio >

TRE-2619

Product Details

Texas Ranger TRE-2619: Commercial Compact AM CB Mobile Transceiver

The Texas Ranger TRE-2619 is a high-performance, commercial-grade AM CB radio engineered specifically for professional drivers and fleet operators who require reliable mobile communication within a space-saving footprint.

Precision Space Optimization

Designed to integrate seamlessly into modern commercial fleet cabs, the TRE-2619 utilizes a compact 7-1/4 W x 9 D x 2-1/4 H inch chassis. This standardized form factor allows for clean installation into dashboard cubbyholes, overhead consoles, or under-dash mounts without interfering with vehicle control ergonomics.

Acoustic Noise Management

Clear highway communication requires robust signal filtration. The TRE-2619 is equipped with standard switchable Noise Blanker (NB) and Automatic Noise Limiter (ANL) circuits to suppress ignition interference and electrical static. Paired with the SRA-198NC dynamic noise-cancelling microphone—featuring a directional acoustic chamber—the system aggressively isolates operator voice from ambient diesel engine clatter and low-frequency road vibration.

Integrated Calibration and Diagnostic Tools

System protection is prioritized through a built-in SWR diagnostic bridge paired with a high-visibility Antenna Warning LED. Utilizing this multi-functional monitoring suite, operators receive instant visual alerts during impedance mismatches, allowing them to safeguard internal transmitter circuitry against destructive power feedback without checking manual meters while driving.

Professional Operational Ergonomics

Engineered for distraction-free operation, the TRE-2619 replaces complex digital menus with high-torque mechanical knobs for Volume, Squelch, RF Gain, and Mic Gain. Featuring a 3-position Talkback toggle switch with High, OFF, and Low settings for instant voice monitoring flexibility, and a dedicated dimmer potentiometer to adjust instrument lighting for optimal night vision, this transceiver provides precise analog control under all driving conditions. 

What’s in the box :

TRE-2619 Mobile Transceiver

SRA-198NC Dynamic Noise-Cancelling Microphone

Heavy-Duty Mobile Mounting Bracket and Hardware Kit

Fused DC Power Cord

Microphone Hanger and Mounting Hardware

Owner’s Manual

Specification

General:

Model: TRE-936FFB

Channels: 40

Frequency Range: 26.965 ~ 27.405 MHz

Emission: AM

Frequency Control: Phase-Lock-loop (PLL) Synthesizer

Frequency Stability: 0.00%

Temperature Range: -30°C to +50°C

Antenna Impedance: 50 Ohms

Input Voltage: 13.8V DC

Weight: 4.2 lbs

Size: 7- 3/8” (W) x 8- 3/4” (D) x 2- 1/4” (H)

Transmitter:

RF Power Output: 4W

Spurious Emission: -60 dB

Audio Distortion: 10%

Microphone: Dynamic

Frequency Response: 300 to 2500 Hz

Receiver:

Sensitivity for 10 dB (S+N)/N: < 1.0 uV

Squelch Sensitivity: < 0.5 uV

Image Rejection: More than 65 dB

Audio Response: 300 to 2500 Hz

Audio Power Output: 3W @ 10% Distortion

AGC Figure of Merit: 100 mV for 10dB Change in Audio Output

Specification

General:
ModelTRE-936FFB
Channels40
Frequency Range26.965 ~ 27.405 MHz
EmissionAM
Frequency ControlPhase-Lock-loop (PLL) Synthesizer
Frequency Stability0.00%
Temperature Range-30°C to +50°C
Antenna Impedance50 Ohms
Antenna ConnectorsStandard SO-239 type
Input Voltage13.8V DC
Size7- 3/8” (W) x 8- 3/4” (D) x 2- 1/4” (H)
Weight4.2 lbs.

TRANSMITTER:
RF Power Output4W
Spurious Emission-60 dB
Audio Distortion10%
Frequency Response300 to 2500 Hz
MicrophoneDynamic

RECEIVER:
Sensitivity for 10 dB (S+N)/N< 1.0 uV
Squelch Sensitivity< 0.5 uV
Image RejectionMore than 65 dB
AGC Figure of Merit100 mV for 10dB Change in Audio Output
Audio Power Output3W @ 10% Distortion
Audio Response300 to 2500 Hz

Technical Specifications

Operating Modes: AM Mode Only (40 Channels)

Chassis Construction: Compact Mobile Footprint (7.25 x 9.00 x 2.25 Inches)

Metering Matrix: S-Meter, RF Power, SWR, Modulation Percentage

System Diagnostics: Built-in SWR Bridge with High SWR LED Alert

Noise Circuitry: Switchable NB, ANL

Audio Monitoring: 3-Position Talkback Switch (High, OFF, Low)

Display Intensity: Variable Instrument Dimmer Potentiometer

Additional Support: PA Function

1. MICROPHONE JACK

2. MIC GAIN CONTROL

3. ON/OFF VOLUME CONTROL

4. SQUELCH CONTROL

5. RF GAIN CONTROL

6. SWR CAL CONTROL

7. S-RF/CAL/SWR SWITCH

8. TALKBACK CONTROL

9. CHANNEL SELECTOR

10. FRONT PANEL METER

11. TX/RX LED

12. FREQUENCY COUNTER

13. DIM/BRT SWITCH

14. COUNTER OFF

15. PA/CB SWITCH

16. NB/ANL SWITCH

17. ROGER BEEP SWITCH

18. CH19/NORMAL SWITCH

19. CHANNEL DISPLAY

1. ANTENNA

2. DC POWER

3. PA SP

4. EXT. SP

Controls and Indicators

1. MICROPHONE JACK2. MIC GAIN CONTROL
3. ON/OFF VOLUME CONTROL4. SQUELCH CONTROL
5. RF GAIN CONTROL6. SWR CAL CONTROL
7. S-RF/CAL/SWR SWITCH8. TALKBACK CONTROL
9. CHANNEL SELECTOR10. FRONT PANEL METER
11. TX/RX LED12. FREQUENCY COUNTER
13. DIM/BRT SWITCH14. COUNTER OFF
15. PA/CB SWITCH16. NB/ANL SWITCH
17. ROGER BEEP SWITCH18. CH19/NORMAL SWITCH
19. CHANNEL DISPLAY 

1. ANTENNA2. DC POWER
3. PA SP4. EXT. SP